LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-3701003.png)
terminal.
3. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)
(a) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Removal.
4. REMOVE REAR SEAT ASSEMBLY (for Power Seat)
(a) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Removal.
5. REMOVE REAR SEAT ASSEMBLY (for Ottoman)
(a) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
6. REMOVE REAR DOOR SCUFF PLATE LH
(a) for Standard Body:
Remove the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Removal.
(b) for Long Body:
Remove the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Removal.
7. REMOVE REAR DOOR SCUFF PLATE RH
(a) for Standard Body:
Remove the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Removal.
(b) for Long Body:
Remove the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Removal.
8. REMOVE REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal
9. REMOVE REAR SEAT SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal
10. REMOVE ROOF SIDE GARNISH INNER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Removal
11. REMOVE ROOF SIDE GARNISH INNER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Removal
12. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) except Ottoman Seat:
Using a moulding remover, detach the 4 claws and remove the 3 belt guides.
(b) for Ottoman Seat:
Using a moulding remover, detach the 4 claws and remove the 2 belt guides.
(c) Detach the 2 clips of the panel. Then pass the rear seat belt floor anchors through the panel.
(d) W/O Rear Cooler:
Remove the panel.
(e) W/ Rear Cooler:
