LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2723001.png)
Alarm Module: Service and Repair
Installation
ENGINE IMMOBILIZER: CERTIFICATION ECU: INSTALLATION
1. INSTALL CERTIFICATION ECU
(a) Install the ECU with the nut.
(b) Connect the 2 connectors.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
6. REGISTER ECU CODE
(a) Register the ECU code See: Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Engine Immobilizer System.
