LS 460 RWD V8-4.6L (1UR-FSE) (2010)
4. REMOVE INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE INSTRUMENT PANEL LOWER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Front Passenger Side Knee Airbag Assembly/Removal
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Front Passenger Side Knee Airbag Assembly/Removal
8. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
10. REMOVE PARKING ASSIST ECU
(a) Disconnect the each connectors.
NOTICE:
Do not forcibly disconnect the connector.
(b) Remove the bolt, nut and parking assist ECU.
(c) Remove the bolt, nut and parking assist ECU from the suspension control ECU.
NOTICE:
*
Avoid any impact to the parking assist ECU.
*
Do not drop the ECU. If it is dropped, replace it with a new one.
Installation
PARK ASSIST / MONITORING: PARKING ASSIST ECU (w/ Advanced Parking Guidance System): INSTALLATION
1. INSTALL PARKING ASSIST ECU
(a) Install the parking assist ECU to the suspension control ECU with the nut and bolt.