LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY See: Trunk / Liftgate Spring/Service and Repair/Removal
4. REMOVE ROPE HOOK See: Trunk / Liftgate Spring/Service and Repair/Removal
5. REMOVE DECK TRIM SIDE BOARD LH See: Trunk / Liftgate Spring/Service and Repair/Removal
6. REMOVE DECK TRIM SIDE BOARD RH See: Trunk / Liftgate Spring/Service and Repair/Removal
7. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Trunk / Liftgate Spring/Service and Repair/Removal
8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler) See: Trunk / Liftgate Spring/Service and Repair/Removal
9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Removal and Replacement/Air Conditioning Unit (for Rear Side)/Installation
10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER See: Trunk / Liftgate Spring/Service and Repair/Removal
11. REMOVE REAR FLOOR FINISH PLATE See: Trunk / Liftgate Spring/Service and Repair/Removal
12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Trunk / Liftgate Spring/Service and Repair/Removal
13. REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and nut.
(c) Remove the luggage closer motor.
Installation
ENGINE HOOD / DOOR: TRUNK LID ACTUATOR: INSTALLATION
1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY
(a) Install the luggage closer motor with the 3 bolts and nut.