LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Trunk / Liftgate Spring: Service and Repair
Installation
ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: INSTALLATION
HINT
*
The installation should be performed in the order of LH to RH.
*
After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close
smoothly.
1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT
(a) Install the torsion bar support.
2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH
(a) Set the tip of the luggage door hinge torsion bar LH in the installation hole in the center. The upper and lower holes are used for adjustment.
(b) Connect the luggage door hinge torsion bar LH to the body RH side.
(c) Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.
(d) Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side
SST : 09804-24010