LS 460 RWD V8-4.6L (1UR-FSE) (2010)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
4. REMOVE NO. 1 INSTRUMENT CLUSTER MOULDING See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the luggage door opening switch.
Installation
ENGINE HOOD / DOOR: LUGGAGE DOOR OPENING SWITCH: INSTALLATION
1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Attach the 2 claws and door opening switch.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and