LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Body Emblem: Service and Repair
Installation
EXTERIOR: NAME PLATE: INSTALLATION
HINT
When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.
Standard:
NOTICE:
Do not heat the vehicle body, emblem or name plate excessively.
1. INSTALL SYMBOL EMBLEM
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new symbol emblem.
(1) Using a heat light, heat the vehicle body and a new symbol emblem.
(2) Remove the peeling paper from the face of the symbol emblem.
NOTICE:
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Install the symbol emblem.
2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new No. 1 luggage compartment door name plate.