LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Removal
SEAT: REAR POWER SEAT MOTOR ASSEMBLY (for Power Seat): REMOVAL
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT
Before removing the rear seat, make sure to move the seat 37 mm (1.46 in.) from the rearmost position.
1. REMOVE COWL TOP VENTILATOR LOUVER See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE REAR SEAT CUSHION ASSEMBLY LH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for Power
Seat)/Removal