LS 460 RWD V8-4.6L (1UR-FSE) (2010)
HINT
*
for Power Seat:
*
Before removing the rear seat, make sure to move the seat 37 mm (1.46 in.) from the rearmost position.
*
for Ottoman:
*
Before removing the rear seat, make sure to move the seat 17 mm (0.67 in.) from the rearmost position.
1. REMOVE COWL TOP VENTILATOR LOUVER See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE REAR SEAT CUSHION ASSEMBLY LH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Removal
4. REMOVE REAR SEAT CUSHION ASSEMBLY RH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Removal
5. REMOVE REAR SEAT CUSHION AIRBAG ASSEMBLY RH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Removal
6. REMOVE REAR SEATBACK ASSEMBLY LH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Removal
7. REMOVE REAR SEAT CONSOLE BOX (w/ Rear Console Box) See: Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Rear Console Box (For Ottoman)/Removal
8. REMOVE REAR SEATBACK ASSEMBLY RH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Removal
9. REMOVE REAR NO. 2 SEAT ADJUSTER ASSEMBLY
(a) w/ Center Seat:
Remove the nut and anchor part of the rear seat outer belt assembly.
(b) Remove the 4 bolts, nut and seat adjuster.