LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(f) Disconnect the connector and remove the No. 2 switch wire.
11. REMOVE CURTAIN SWITCH ASSEMBLY (for 5-Passenger with Ottoman)
(a) Detach the wire harness clamps and disconnect the connectors.
(b) Remove the 4 screws.
(c) Using a screwdriver, detach the claw and remove the wire harness clamp.
(d) Remove the 8 screws and center armrest box with center armrest door.
(e) Remove the 2 screws and the curtain switch.
(f) Disconnect the connector and remove the No. 2 switch wire.
Installation
SEAT: CLIMATE CONTROL SEAT SWITCH (for Rear Side): INSTALLATION
HINT
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts.