LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-3048002.png)
(a) Remove the hog rings and detach the 2 pieces of fastening tape.
(b) Detach the 10 claws and remove the seat cushion cover.
Installation
SEAT: REAR SEAT CUSHION HEATER (for Ottoman): INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR SEAT CUSHION COVER SUB-ASSEMBLY RH
(a) Attach the 10 claws.
(b) Attach the 2 pieces of fastening tape.
(c) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
NOTICE:
*
Be careful not to damage the cover.
*
When installing the hog rings, avoid wrinkling the cover.
2. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY RH See: Service and Repair/Overhaul/Rear Seat Assembly (For
Ottoman)/Reassembly
3. INSTALL REAR SEAT CUSHION COVER SUB-ASSEMBLY LH
(a) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
4. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY LH See: Service and Repair/Overhaul/Rear Seat Assembly (For
Ottoman)/Reassembly
5. INSTALL REAR SEAT CUSHION ASSEMBLY RH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Installation
6. INSTALL REAR SEAT CUSHION ASSEMBLY LH See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Ottoman)/Installation