LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Installation
SEAT: REAR SEAT CUSHION HEATER (for Fixed Seat Type): INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR SEAT CUSHION COVER SUB-ASSEMBLY
(a) Attach the fastening tape.
NOTICE:
Make sure that the fastening tape is securely attached to the cushion pad fastener at the rear seat cushion cover center seat belt
placement area.
(b) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
NOTICE: