LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE:
Make sure to securely insert the brake accumulator pump until the claws of the clamp are attached.
3. INSTALL NO. 4 BRAKE ACTUATOR BRACKET
(a) Install the No. 4 brake actuator bracket to the brake actuator with the bolt.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
4. CONNECT BRAKE ACCUMULATOR PUMP CONNECTOR BOX
(a) Connect the brake accumulator pump connector box as follows:
(1) Install the connector box with the nut (labeled A).
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
(2) Attach the wiring harness clamp (labeled B).
5. INSTALL NO. 3 BRAKE ACTUATOR TUBE
NOTICE:
*
Do not damage the No. 3 brake actuator tube, brake actuator and brake accumulator pump.
*
When installing the No. 3 brake actuator tube, hold the tube, brake actuator and brake accumulator pump securely.
*
When tightening the nut, make sure that other parts do not move with the nut.
(a) Using a union nut wrench, connect the No. 3 brake actuator tube.