LS 460 RWD V8-4.6L (1UR-FSE) (2010)
5. INSTALL FRONT DISC (except 6-Pot Caliper) See: Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (except
6-Pot Caliper)/Installation
6. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY (for 6-Pot Caliper) See: Disc Brake System/Service and Repair/Removal and
Replacement/Front Brake (for 6-Pot Caliper)/Installation
7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY (except 6-Pot Caliper) See: Disc Brake System/Service and Repair/Removal and
Replacement/Front Brake (except 6-Pot Caliper)/Installation
8. INSTALL SKID CONTROL SENSOR WIRE
(a) Connect the connector to the front speed sensor.
(b) Install the sensor clamp with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(c) Connect the pad wear indicator connector.
(d) Install the 2 sensor clamps with the 2 bolts.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
Do not twist the sensor wire when installing the clamps.
(e) Install the sensor clamp with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
Do not twist the sensor wire when installing the clamp.
(f) Attach the sensor clip.
(g) Connect the sensor connector.
(h) Connect the front fender liner.
9. INSTALL FRONT WHEEL See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Removal and