LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Repair/Removal and Replacement/Removal.
5. DISCONNECT CONNECTORS
(a) Disconnect the brake pedal stroke sensor connector (labeled A).
(b) Disconnect the stop light switch connector (labeled B), and then detach the wire harness clamp (labeled C).
6. REMOVE BRAKE PEDAL RETURN SPRING
(a) Remove the spring.
7. REMOVE PUSH ROD PIN
(a) Remove the clip and push rod pin.
8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY
(a) Remove the 4 nuts.