LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Connect the brake pedal stroke sensor connector (labeled C).
5. CHECK BRAKE DRAG
6. CHECK AND ADJUST BRAKE PEDAL HEIGHT See: Adjustments
7. ADJUST BRAKE PEDAL STROKE SENSOR See: Adjustments
8. CHECK BRAKE PEDAL FREE PLAY See: Adjustments
9. CHECK BRAKE PEDAL RESERVE DISTANCE See: Adjustments
10. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Install the instrument panel safety pad See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation.
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
13. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.