LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-1661002.png)
17. REMOVE SKID CONTROL ECU See: Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and
Repair/Removal
18. REMOVE SKID CONTROL ECU BRACKET See: Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and
Repair/Removal
19. DISCONNECT NO. 3 RELAY BLOCK
(a) While pushing the claw of the No. 3 relay block, pull out the No. 3 relay block and disconnect it from the reservoir bracket.
NOTICE:
Do not allow brake fluid to contact the No. 3 relay block.
20. REMOVE BRAKE FLUID RESERVOIR See: Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
21. REMOVE NO. 1 RESERVOIR HOSE See: Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
22. REMOVE RESERVOIR BRACKET See: Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
23. REMOVE FRONT WHEEL
24. DISCONNECT BRAKE TUBE
(a) Using a union nut wrench, disconnect the 6 brake tubes from the actuator.
(b) Use tags or make a note to identify the reconnection locations.
*
*1: To FR RH
*
*2: To FR LH
*
*3: To: RR RH
*
*4: To RR LH
*
*5: From Master Cylinder
*
*6: From Stroke Simulator