LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Parking Brake Actuator: Service and Repair
Installation
PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: INSTALLATION
1. APPLY HIGH TEMPERATURE GREASE See: Service and Repair/Overhaul/Reassembly
2. INSTALL ELECTRIC PARKING BRAKE ACTUATOR ASSEMBLY
(a) Install the electric parking brake actuator with the 3 nuts.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
(b) Install the 3 harness clamps to the member.
(c) Install the bolt and 5 nuts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
3. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Overhaul/Reassembly
4. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
5. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Overhaul/Reassembly
6. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
7. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET LH See: Service and Repair/Overhaul/Reassembly
8. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET RH