LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-883001.png)
Oil Level Sensor: Testing and Inspection
1UR-FSE LUBRICATION: OIL LEVEL SENSOR (for 2WD): INSPECTION
1. INSPECT ENGINE OIL LEVEL SENSOR
(a) Partially immerse the sensor in an oil bath and warm up the oil bath.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the sensor.
