LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
9. INSTALL V-RIBBED BELT See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Installation
10. INSTALL INTAKE AIR CONNECTOR PIPE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
11. INSTALL RADIATOR RESERVOIR ASSEMBLY See: Cooling System/Thermostat/Service and Repair/Installation
12. INSTALL NO. 1 AIR CLEANER INLET See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
13. INSTALL ENGINE ROOM SIDE COVER RH See: Service and Repair/Removal and Replacement/Engine/Installation
14. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
15. INSTALL V-BANK COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
16. ADD ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
17. INSPECT FOR COOLANT LEAK See: Cooling System/Testing and Inspection/Component Tests and General Diagnostics
18. INSTALL NO. 1 ENGINE UNDER COVER See: Cooling System/Coolant/Service and Repair