LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-991004.png)
(d) Remove the 2 gaskets from the exhaust manifold side, and the 2 gaskets from the tailpipe side.
14. REMOVE HEATED OXYGEN SENSOR (for AWD)
NOTICE:
Do not strike the metal part of the sensor.
(a) for Bank 1:
Using SST, loosen the sensor and then remove the sensor by hand.
SST : 09224-00010
15. REMOVE TAILPIPE LH
(a) Disconnect the 3 exhaust pipe support and remove the tail pipe.
16. REMOVE TAILPIPE RH
(a) Disconnect the 3 exhaust pipe support and remove the tail pipe.