LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(d) Connect the 3 connectors.
6. INSTALL HOOD LOCK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Installation
7. INSTALL HOOD LOCK CONTROL CABLE COVER
(a) Install the cover with the 3 screws and attach the claw.
8. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
(a) Install the sensor with the 3 bolts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
9. INSTALL NO. 1 AIR CLEANER INLET See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
10. INSTALL V-BANK COVER SUB-ASSEMBLY
11. INSTALL NO. 1 ENGINE UNDER COVER
12. INSTALL FRONT BUMPER COVER
(a) w/ Intuitive Parking Assist System:
Connect the No. 4 engine room main wire connector.
(b) Connect the 2 fog light connectors.
(c) Attach the 6 claws to install the front bumper cover as shown in the illustration.