LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2296009.png)
(a) Sufficiently apply compressor oil to 4 new O-rings and the fitting surface of the cooler evaporator.
Compressor oil:
ND-OIL8 or equivalent
(b) Install the 2 O-rings on the evaporator.
(c) Install the 2 O-rings on the A/C tube.
(d) Install the expansion valve and A/C tube to the evaporator.
(e) Using a 4 mm hexagon wrench, install the A/C tube with the 2 hexagon bolts.
Torque : 3.5 Nm (35 kgf-cm, 30 in-lbf)
3. INSTALL AIR CONDITIONER THERMISTOR ASSEMBLY
NOTICE:
If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted. Insert the sensor within
range C shown in the illustration.
(a) Install the sensor as shown in the illustration.
(b) Attach the clamp.