LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Set the lever onto the stopper, as shown in the illustration.
(b) Install the damper servo with the 2 screws.
(c) Connect the connector.
16. INSTALL REAR MODE SERVO MOTOR RH
(a) Set the lever onto the stopper, as shown in the illustration.
(b) Install the damper servo with the 2 screws.
(c) Connect the connector.
17. INSTALL AIR OUTLET SERVO MOTOR LH (Face)
(a) Install the damper servo with the 2 screws.
(b) Connect the connector.
(c) Set the lever so that the cutout part engages with a tooth of the gear, and then attach the 3 claws to install the lever.