LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2296020.png)
(c) Remove the 2 O-rings from the cooler refrigerant suction pipe A.
7. REMOVE ROOF BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws and damper servo.
8. REMOVE ROOF BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws and damper servo.
9. REMOVE DIFFUSE MODE DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws and damper servo.
10. REMOVE EXHAUST MODE DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and damper servo.