LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-3180002.png)
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (CLOCK - BATTERY AND BODY GROUND)
(a) Disconnect the L38 clock assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Symptom Related
Diagnostic Procedures