LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Turn Signal Lamp: Service and Repair
Removal
LIGHTING: SIDE TURN SIGNAL LIGHT ASSEMBLY: REMOVAL
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. REMOVE OUTER MIRROR LH
(a) Remove the outer mirror LH See: Body and Frame/Mirrors/Service and Repair/Outer Rear View Mirror/Removal.
2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
(a) Remove the 4 screws.
(b) Detach the 3 claws and 3 guides and remove the rim.
(c) Detach the 2 guides.
(d) Disconnect the connector.
(e) Remove the visor cover with the light.
(f) Detach the 2 guides and remove the 2 screws and light.
(g) Detach the 2 claws and remove the light from the plating visor.