LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3495006.png)
HINT
Tape the screwdriver tip before use.
(b) Remove the 2 screws.
(c) Disconnect the connector and remove the rear vanity light.
Installation
LIGHTING: VANITY LIGHT (for Rear): INSTALLATION
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. INSTALL REAR VANITY LIGHT ASSEMBLY
(a) Connect the connector.
(b) Install the rear vanity light with the 2 screws.
(c) Attach the 4 claws and install the lens.