LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-708009.png)
(1) Remove the front No. 2 suspension lower arm See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front Lower
Suspension Arm/Removal.
(2) Measure the dimension between the center of the front suspension lower arm bush and position A.
Standard length:
315.6 mm (12.425 in.)
HINT
If the dimension of the front suspension lower arm changes 2 mm (0.0787 in.), the camber will change approximately 15' (0.25°).
(d) Inspect the front No. 1 suspension upper arm.
(1) Remove the front No. 1 suspension upper arm See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front Upper
Suspension Arm/Removal.
(2) Measure the dimension between the center of the front No. 1 suspension upper arm bush and the ball joint stud.
Standard length:
235.8 mm (9.283 in.)
HINT
If the dimension of the front suspension upper arm changes 2 mm (0.0787 in.), the camber will change approximately 15' (0.25°).
(e) Inspect the front No. 2 suspension upper arm.
(1) Remove the front No. 2 suspension upper arm See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front Upper
Suspension Arm/Removal.
(2) Measure the dimension between the center of the front No. 2 suspension upper arm bush and the ball joint stud.
Standard length: