LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-709001.png)
Alignment: Service and Repair
Rear Wheel Alignment
SUSPENSION: REAR WHEEL ALIGNMENT: ADJUSTMENT
1. INSPECT TIRE
(a) Inspect the tires See: Wheels and Tires/Testing and Inspection/Component Tests and General Diagnostics.
2. MEASURE VEHICLE HEIGHT
(a) Measure the vehicle height for coil suspension See: Front Wheel Alignment.
(b) Measure the vehicle height for air suspension See: Front Wheel Alignment.
3. INSPECT TOE-IN
Standard toe-in:
B - A 3 +/-2 mm (0.12 +/-0.08 in.)
*
If the toe-in is not within the specified range, inspect the suspension parts and replace if necessary.
4. ADJUST TOE-IN
(a) Loosen the toe adjust cam nut.
(b) Turn the adjust cams by an equal amount to adjust toe-in.
HINT
*
Try to adjust the toe-in to the center value.
*
The toe-in will change by the following specification corresponding to each graduation of the cam:
Approximately:
4.8 mm (0.188 in.)
(c) Tighten the nut.
Torque : 60 Nm (612 kgf-cm, 44 ft-lbf)
5. INSPECT CAMBER