LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT IN ALL HARNESSES AND CONNECTORS CONNECTED TO FUSE AND REPLACE FUSE
OK -- Continue to next step.
8. INSPECT EFI RELAY (EFI MAIN2)
(a) Remove the EFI MAIN2 relay from the engine room No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE EFI RELAY (EFI MAIN2)
OK -- Continue to next step.
9. CHECK HARNESS AND CONNECTOR (EFI RELAY (EFI MAIN2) - ECM, BODY GROUND)