LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE:
*
Check that there are no scratches or foreign matter around the connecting part of the fuel tube connector and pipe before
connecting them.
*
After connecting the fuel tube connector, check that the fuel tube connector is securely connected by trying to pull the fuel tube
connector and pipe apart.
2. INSTALL FLOOR NO. 1 UNDER COVER
(a) Install the under cover with the 5 nuts and 5 clips.
(b) Install the 2 hole plugs.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
4. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation