LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1336001.png)
Fuel Pressure Pulsation Damper: Service and Repair
Installation
1UR-FSE FUEL: FUEL PRESSURE PULSATION DAMPER: INSTALLATION
1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
(a) Temporarily install each dampers together with 2 new gaskets and the pipe to the fuel pump.
(b) Install the 2 clamp bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Using SST, tighten the 2 dampers.
SST : 09612-24014
09617-24011
without SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)