LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-1325003.png)
(b) Install the fuel pressure regulator to the fuel filter.
(c) Attach the 2 claws of the fuel filter and install the cap.
NOTICE:
*
Make sure the O-rings are not cut or pinched during the installation.
*
Attach the claws securely.
2. INSTALL JET PUMP
(a) Apply gasoline to a new O-ring and install it to the jet pump.
(b) Install the jet pump to the sub-tank as shown in the illustration.
3. INSTALL FUEL FILTER
(a) Install the fuel filter to the sub-tank and attach the 2 claws.