LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE
^
ECU damage may occur if the correct battery charger and mode setting are NOT used.
^
Power Supply Mode is used to maintain battery voltage at 13.5 volts while flash reprogramming the vehicle.
^
For details on how to use the GR8 Battery Diagnostic Station, refer to the GR8 Instruction Manual located on TIS, Diagnostics - Tools &
Equipment - Battery Diagnostics.
3. Click the appropriate calibration ID and reprogram the vehicle's ECU with Techstream.
A. After reviewing the procedures outlined in the selected TSIB, click the appropriate calibration ID link by matching the vehicle's current
calibration ID to the Previous Calibration ID in the Calibration Identification Chart.
NOTE