LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Install the element to the air cleaner case.
(c) Install the air cleaner cap to the air cleaner case with the 2 clips.
Torque : 3.8 Nm (39 kgf-cm, 34 in-lbf)
HINT
*
Insert the protrusion of the air cleaner hose into the hole of the hose clamp.
*
The hose clamp can be tightened within the range of 2.0 N*m (20 kgf*cm, 18 in.*lbf) to 5.5 N*m (56 kgf*cm, 49 in.*lbf).
(d) Connect the MAF meter connector.
4. INSTALL NO. 1 AIR CLEANER INLET See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Installation
5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
6. INSTALL V-BANK COVER SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Installation