LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Memory Positioning Module: Technical Service Bulletins
Interior - Front Memory Seat ECU Initialization
L-SB-0146-09
October 6, 2009
Initialization of Front Memory Seat ECU During PDS
Service Category
General
Section
Pre-Delivery Service
Market
USA
Applicability
Introduction
As a result of the removal of the DCC fuses (No.1 and No.2) the driving position memory function of the driver and passenger seat will be inoperative
due to loss of the seat position memory stored in the seat ECU.
Initialize the front memory seat ECU after installing the DCC fuses during Pre-Delivery Service (PDS).
Warranty Information
Driver Seat Initialization Procedure
1. Cycle the ENGINE START STOP ignition switch to the IG-ON position.
2. Operate the vertical height switch to the lower side 3 times.