LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2373022.png)
the SST wire harness inside the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
(2) Check that no one is within a 10 m (33 ft.) radius of the tire which the front passenger airbag is tied to.
(3) Press the SST activation switch and deploy the airbag.
CAUTION:
When deploying the airbag, make sure that no one is near the tire.
HINT
The airbag is deployed as the LED of the SST activation switch comes on.
(h) Dispose of the front passenger airbag assembly.
CAUTION:
*
The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a front passenger airbag with a deployed airbag.
*
Do not apply water to a front passenger airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
(1) Remove the front passenger airbag from the tire.
(2) Place the front passenger airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
Front Seat Side Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: DISPOSAL
HINT
When scrapping a vehicle equipped with the SRS or disposing of the front seat side airbag, be sure to deploy the airbag first in
accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT.
of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
*
Never dispose of a front seat side airbag that has an unactivated airbag.
*
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a
nuisance to nearby residents.
*
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away
from electrical noise.
*
When deploying the airbag, perform the operation at least 10 m (33 ft.) away from the airbag.
*
The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a front seat side airbag with a deployed airbag.
*
Do not apply water to a front seat side airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
*
An airbag or pretensioner may be activated by static electricity. To prevent this, be sure to touch a metal surface with bare hands
to discharge static electricity before performing this procedure.
1. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT
Prepare a battery as the power source to deploy the airbag.
