LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2373028.png)
CAUTION:
*
The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a front seat side airbag with a deployed airbag.
*
Do not apply water to a front seat side airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
(1) Remove the front seat side airbag from the tire.
(2) Place the front seat side airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
Rear Seat Side Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: REAR SEAT SIDE AIRBAG ASSEMBLY: DISPOSAL
HINT
When scrapping a vehicle equipped with the SRS or disposing of the rear seat side airbag, be sure to deploy the airbag first in
accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT.
of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
*
Never dispose of a rear seat side airbag that has an unactivated airbag.
*
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a
nuisance to nearby residents.
*
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the in a place away from
electrical noise.
*
When deploying the airbag, perform the operation in a place away from electrical noise.
*
The rear seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a rear seat side airbag with a deployed airbag.
*
Do not apply water to a rear seat side airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
*
An airbag or pretensioner may be activated by static electricity. To prevent this, be sure to touch a metal surface with bare hands
to discharge static electricity before performing this procedure.
1. DISPOSE OF REAR SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of SST See: Testing and Inspection/Rear Seat Side Airbag Assembly.
(b) Read the precaution See: Service Precautions.
(c) Disconnect the cable from the negative (-) battery terminal.
CAUTION: