LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(c) Remove the nut and front seat inner belt assembly.
Installation
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. INSTALL FRONT SEAT INNER BELT ASSEMBLY
(a) Install the front seat inner belt assembly with the nut.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.
(b) for Driver Seat:
Connect the 3 connectors and attach the 5 clamps.