LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2438026.png)
(a) Remove the bolt and belt.
3. REMOVE REAR SEAT INNER BELT ASSEMBLY LH
(a) Remove the bolt and belt.
Installation
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Ottoman): INSTALLATION
HINT
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard
Bolt - Specified Torque For Standard Bolts.
1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH
(a) Install the seat belt with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL REAR SEAT INNER BELT ASSEMBLY RH
(a) Install the seat belt with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)