LS 460 RWD V8-4.6L (1UR-FSE) (2010)
*
The procedure listed below is for the LH side.
1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Using a screwdriver, detach the 2 clips.
HINT
Tape the screwdriver tip before use.
(b) Disconnect the connector and remove the armrest base panel assembly.
(c) Detach the 2 claws and remove the power window regulator switch assembly.
Installation
WINDSHIELD / WINDOW GLASS: REAR POWER WINDOW SWITCH: INSTALLATION
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Attach the 2 claws to install the power window regulator switch assembly.
(b) Connect the connector.