LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Rain Sensor: Service and Repair
Removal
WIPER AND WASHER: RAIN SENSOR: REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE RAIN SENSOR COVER (w/o Lane Keeping Assist System) See: Body and Frame/Mirrors/Service and Repair/Inner Rear View
Mirror/Removal
4. REMOVE RAIN SENSOR COVER (w/ Lane Keeping Assist System) See: Body and Frame/Mirrors/Service and Repair/Inner Rear View
Mirror/Removal
5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY See: Body and Frame/Mirrors/Service and Repair/Inner Rear View Mirror/Removal
6. REMOVE RAIN SENSOR
(a) Pull the stopper in the direction shown in the illustration, and release the lock.
(b) Disconnect the connector, and remove the rain sensor.