LS 460 RWD V8-4.6L (1UR-FSE) (2010)
4. INSTALL GENERATOR BRUSH HOLDER ASSEMBLY
(a) Insert a pin (diameter 1.0 mm) into the generator brush holder assembly to fix the 2 brushes in place.
(b) Install the generator brush holder to the generator coil with the 2 screws.
Torque : 1.8 Nm (18 kgf-cm, 16 in-lbf)
(c) Remove the pin (diameter 1.0 mm).
5. INSTALL GENERATOR TERMINAL INSULATOR
(a) Install the generator terminal insulator to the generator coil.
6. INSTALL GENERATOR REAR END COVER
(a) Install the generator rear end cover to the generator coil with the 3 nuts.
Torque : 4.6 Nm (47 kgf-cm, 41 in-lbf)
7. INSTALL GENERATOR PULLEY
SST : 09820-63011
09820-06010