LS 460 RWD V8-4.6L (1UR-FSE) (2010)
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE GENERATOR ASSEMBLY
(a) Remove the generator See: Charging System/Alternator/Service and Repair/Removal and Replacement/Removal.
4. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(a) Remove the front exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal.
5. REMOVE ENGINE UNDER COVER REAR LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Removal
6. REMOVE ENGINE UNDER COVER REAR RH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Removal
7. DISCONNECT FRONT STABILIZER BAR See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal
and Replacement/AA80E Automatic Transmission/Transmission Assembly/Removal
8. REMOVE ENGINE UNDER COVER RH
(a) Remove the screw, clip and engine under cover.
9. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
(a) Remove the 4 bolts and front suspension member reinforcement.
10. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
11. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
12. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and
Repair/Removal
13. REMOVE NO. 3 EXHAUST MANIFOLD HEAT INSULATOR