LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Remove the 2 screws and end frame.
NOTICE:
While holding down the lead wire, remove the starter commutator end frame.
4. REMOVE STARTER ARMATURE ASSEMBLY
(a) Using a screwdriver, hold the spring back and disconnect the brush from the brush holder.
(b) Disconnect the 4 brushes and remove the brush holder.
(c) Remove the starter armature from the yoke.
5. REMOVE STARTER YOKE ASSEMBLY
(a) Remove the starter yoke from the starter center bearing clutch sub-assembly.
6. REMOVE STARTER ARMATURE PLATE
(a) Remove the armature plate from the center bearing clutch sub-assembly.
7. REMOVE PLANETARY GEAR