LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Install the starter yoke.
5. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
(a) Install the starter brush holder assembly.
(b) Using a screwdriver, hold the brush spring back and connect the brush into the brush holder.
(c) Connect the 4 brushes.
(d) Align the starter commutator end frame rubber with the groove of the starter yoke.
(e) Install the starter commutator end frame with the 2 screws.
Torque : 3.8 Nm (39 kgf-cm, 33 in-lbf)
6. INSTALL STARTER DRIVE HOUSING ASSEMBLY
(a) Apply high-temperature grease to the starter pinion drive lever, as shown in the illustration.