LS 460 RWD V8-4.6L (1UR-FSE) (2010)
09961-02010
NOTICE:
*
Do not damage the dust cover.
*
As the dust cover may be damaged, adjust SST with the center nut so that the body and claw are parallel.
*
Make sure to tie the string of SST to the vehicle to prevent SST from dropping.
21. DISCONNECT TIE ROD ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
22. REMOVE POWER STEERING LINK ASSEMBLY (for 2WD)
(a) Detach the 3 clips and disconnect the 5 connectors.
HINT
Disconnect connector A as shown in the illustration.
(b) Remove the 4 bolts, 4 nuts, power steering link and rack housing bracket from the front frame.
23. REMOVE POWER STEERING LINK ASSEMBLY (for AWD)
(a) Detach the 2 clips, 3 clamps and disconnect the 5 connectors.
HINT
Disconnect connector A as shown in the illustration.