LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(d) Remove the height control sensor.
NOTICE:
Do not drop the height control sensor. If it is dropped, replace it with a new one.
Installation
SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Front LH): INSTALLATION
HINT
*
Use the same procedures for the RH side and LH side.
*
The procedures listed below are the LH side.
1. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
(a) Install the height control sensor with the 2 bolts.
Torque : 13.5 Nm (138 kgf-cm, 10 ft-lbf)
NOTICE:
Do not drop the height control sensor. If it is dropped, replace it with a new one.
(b) Connect the height control sensor link to the lower arm with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the connector and attach the 2 clips.