LS 460 RWD V8-4.6L (1UR-FSE) (2010)
4. ADJUST FLUID LEVEL
(a) w/o Air Suspension:
Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST : 09843-18040
(b) w/ Air Suspension:
Using SST, connect terminals 13 (TC), 11 (OPB) and 4 (CG) of the DLC3.
SST : 09843-18040
(c) Start the engine.
NOTICE:
Air conditioning switch must be turned off.
(d) Slowly move the shift lever from P to S, then move the shift lever from the 1 to 8. Then return the shift lever to P.
(e) Move the shift lever to the D position, and quickly move back and forth between N and D (once per less than 1.5 seconds) for at least 6
seconds.
This will activate the fluid temperature detection mode.
Standard:
Indicator light (D) remains illuminated for 2 seconds and then goes off.
(f) w/o Air Suspension:
Return the shift lever to the P position and disconnect terminals 13 (TC) and 4 (CG).
(g) w/ Air Suspension:
Return the shift lever to the P position and disconnect terminal 13 (TC).